Netgear router PPPoE / Static configuratiin ( DSL Internet Connection )

Installation Procedure:
Connect the Modem to the Internet port of the NETGEAR router and the computer to any of the four LAN ports as shown in the diagram.

1. Open an Internet Explorer browser and type the router IP address which would be either http://192.168.0.1 or http://192.168.1.1 in the address bar and press Enter.

1. • The Login window will prompt for the router configuration username and password.
   • The default username is “admin” and the default password is “password” 

2.  Click Setup Wizard on the top left corner, Select Yes for the Setup Wizard to detect the type of internet connection and click Next.

 3.   The Setup Wizard will detect the type of Internet connection. DSL connections which require a login to connect to the internet will be detected as PPPoE. Click Next

 4.  Configure your router with the username and password provided by your ISP and click Apply.

 or static ip

5.   The router will now save these settings. When complete, you can verify whether you are connected to the internet from the Router Status > Maintenance menu.

 6.  Verify you have a valid IP address (not-blank / 0.0.0.0) on the Internet Port assigned by your ISP