Netgear router PPPoE / Static configuratiin ( DSL Internet Connection )

Installation Procedure:
Connect the Modem to the Internet port of the NETGEAR router and the computer to any of the four LAN ports as shown in the diagram.

1. Open an Internet Explorer browser and type the router IP address which would be either http://192.168.0.1 or http://192.168.1.1 in the address bar and press Enter.

Buffalo Router PPPoE / Static configuraation

1.	Plug the power cable to the router. You should see the Power LED at the front turn green now.
2.	Plug the network cable of WorldLink to the WAN port. Next, take the patch cable and plug one end of it to the LAN port of the Router and other end to the Network Card of the computer.
3	Next, open the Web Browser (Firefox, Internet Explorer etc) and type the Default IP address of the router (192.168.11.1) in the address bar.
4.	It will ask for Router's default “Username” and “Password”. Please provide Username as “root” and Password as “blank”.
5.	After providing username and password, Click on “OK” button